Quality Testing
- Home
- Quality Testing
Amphenol maintains full-fledged testing facilities to ensure quality compliance for all products. We also undertake testing services for interested parties.
List of testing facilities in Amphenol India, Pune
- LDS Shaker Vibration with slip table: 5 to 2500 Hz, Sine 100 g *, Random 80 g* meets MIL-STD-1344 Method 2005, 2004, 2015 ( Note: * subjected to weight of unit under test).
- LDS Shaker Vibration & Shock Test System: 5 to 2000 Hz, Sine 60 g, Random 45 g meets MIL-STD-1344 Method 2005, 2004, 2015
- BUMP Test Machine: 60 to 180 bumps / min meets JSS55555 & MIL 801E
- High Shock Machine: 10 to 1500g and 0.1 to 130 msec, meets MIL STD & EIA STD
- Linear Acceleration Machine: Max 70 kg payload, acceleration up to 50 G, speed 20 to 200 RPM
- Linear Acceleration Tester: Frequency 2 to 5 Hz, Speed 120 to 300 rpm
- INSTRON Dual Column UTM model-3366: Up to 10 kN
- AIKOH Tensile Tester model-1311D:
Tensile & Compression test up to 200Kgs with displacement measurement facility meets
Contact Depression as per MIL-DTL-55116 & Pull force on draw nut as per MIL-DTL-55181 - Contact Walkout Tester: Contact walkout test for 38999 connector meets MIL-DTL-38999
- IMADA Push-Pull load Testers: 1 to 100 Kg
- Compression Tester: Compression test on 164 Audio & MW connectors meets MIL-DTL-55181 & MIL-DTL-55116
- Durability Tester: Durability test setup for Rack & Panel connectors meets MIL-STD-1344 method 2016
- Bounce Testing Machine – BTM-50: Max 125 g
- Pull Force Test Setup (straight and angular): 500 kg
- Torque Meter: Up to 200 lb in
- Torque Meter: Up to 10 Nm
- Thermal Shock chamber zone 1 temperature + 200°C & zone 2 temp + 260°C
- Heating Chamber oven + 300°C which are coupled with Vibration machine.
- WEISS-C600 Climatic Chamber:
Range -70°C to +180 °C &
Humidity 10-98% RH at +10 to +95 °C, meets Mil-STD & EIA Std tests - VOTSCH-7060-5 Climatic Chamber:
Cold test up to -70 °C & Heat test up to +200°C, Humidity, Vibration at hot & cold temperature, Ice Resistance meets Mil-STD-1344 method 1005, Mil-STD-1344, method 1002 or EIA-364-31 & EIA-364-51 - VACCUM Test Chamber:
Dielectric Withstanding Voltage test at altitude & Altitude Immersion meets EIA-364-20 & MIL-STD-1344 method 1004 - AKI make Dry Heat Test Chamber ambient: +10°C to +300°C
- AKI make IEC/JSS Dust Test Chamber ambient: Dust test as per IEC, Dust test as per JSS, Dry Temperature +10°C to +100°C meets IEC60529 Standard IP5X Dust test, JSS55555 Standard TEST No. 14 Dust test.
- Angelantoni Test Technologies, Italy Salt Spray Test Chamber: Salt spray meets MIL-STD-1344
- Angelantoni-Kasco Industries. Salt Spray Test Chamber: Salt spray meets MIL-STD-1344
- Micro Supreme Salt Spray Test Chamber: Salt spray meets MIL-STD-1344 method 1001
- MKS Test System Automated & Programmable Cable Harness Tester Insulation Resistance: 0-2000Vdc, up to 1000MegaOhm & Withstanding Voltage testing 1500Vac-5mA
- HYPOT Tester Auto-sequencing Insulation Resistance: 0-1000Vdc, up to 10GigaOhm & Withstanding Voltage testing 5kVac-20mA/6kVdc-7.5 mA
- Sivananda make Million Megaohmmeter: 0 – 109 Megaohms meets MIL-STD-1344 Method 3003
- Sivananda make DWV Tester: Up to 5KVrms AC meets MIL-STD-1344 Method 3001
- High Current power supply: 110 Volts / 500 Amp DC Current test, temperature rise test & millivolt drop test
- Motwane make Micro-Ohmmeter for Contact Resistance Test: MIL-STD-1344 Method 3002
- Contact Resistance at rated current test setup: Contact resistance at rated current up to 50Amp can be measured walkout test for 38999 connector meets MIL-STD-1344 Method 3004
- Micro Hardness Tester: Micro hardness test (Vickers Hardness, Knoop Hardness, Brinell Hardness) meets Vickers Hardness – JIS Z2244/ ISO 6507-1, JIS Z2243/ISO 6506-1, JIS Z2243/ISO 6506-1
- Magnetic Permeability Tester: Magnetic permeability of non Ferrous materials Stefan Mayer instruments meets MIL-STD-1344 Method 3006
- XRF Coating Thickness Measuring Machines: For measurement of coating thickness on conductive material
- Micro-Vu Corp, USA make VERTEX-251 Auto CNC Vision Measurement System: CNC Control Max Inspection size 250 X 160 X 160 mm for dimensional measurements
- Mitutoyo, Japan make Quickscope Auto CNC Vision Measurement System: Max Inspection size 200 X 200 X100 mm for dimensional measurement
- Mitutoyo, Japan make Coordinate Measuring Machine: Max Inspection size 450 X 400 X300 mm for dimensional measurement
- LENSEL Visual Inspection System with AVERTV Video/Picture software: Magnification of 50X & image capturing facility
Fiber Optic Testing Facilities:
- FLS-300 – EXFO OPTICAL LIGHT SOURCE: For multimode testing test wavelength 850,1300 nm
- FPM-300 – EXFO FIBER OPTIC POWER METER: For multimode testing test wavelength 850, 1300 nm
- GREENLEE 570 XL LED SOURCE: For multimode testing test wavelength 850,1300 nm
- GREENLEE 560 XL POWER METER: For multimode testing test wavelength 850, 1300 nm
- EXFO LTS 3900 LOSS TEST SET: For single mode testing test wavelength 1310, 1550 nm
- VARIAN VSMR152 Helium Leakage Detector up to 10E-9 Atm-cc/sec: Leakage test for hermetic connectors meets Mil-Std-1344 Method 1008
- High Pressure Hydrostatic Test Setup: 90 bar
- Temperature Indicator & USB Data logger: 8 Channel – 70 °C to 200 °C
- AS 9100
- ISO 9001:2008
- IRIS
- MIL-STD-790
- DGQA
- LCSO
- QPL
- VG
- UL